Quad-zone preamplifier; 4 stereo output zones; 3 mono mic/line + 4 stereo line inputs.

Key Features

• Control 4 stereo zones and 4 separate music sources
• Assign up to 3 microphones per zone
• Pair with the ZONE4R remote control panels
• Use a MICPAT-4 microphone for paging
• Not available in U.S. and Canada

Description

The sophisticated pre-amplifier ZONE4 allows you to control four stereo zones with just one affordable unit. In any of the four zones you can play music that comes from one of the four music sources you can connect. There is also the possibility to assign three microphones to each zone where MIC1 can be a dynamic priority microphone (via contact closure) or a four zone selective paging microphone (MICPAT-4). Each signal is assignable to any of the four output zones through dip switches on the front and the back of the unit. Phantom power supply on MIC 1 & 2 can be activated via a dip switch.

The ZONE4 can be controlled from the front panel (with digital display), via the RS232-connector or via the IR serial. On top of that, you can control the unit via the ZONE4R remote control panels. These control panels have a clear LED status display and buttons for music level, MIC/MIX level, source select and mute controls.

On the output side, there is a line input selector and music level control per zone. A clear digital display makes it easier to monitor the functioning of the unit. Further, there are independent MIC-MIX level controls and bass-treble controls per zone. The unit is 19 inch format and comes standard with removable brackets. The removable metal cover (included) protects your MIC-settings.

Because the remote is wired with a normal CAT5 cable, it is very easy to install.

Specs