Biamp MA120 Amp

$550.00

Commercial Audio MA120

19-inch mixing amplifier; 120W or 70/100V, 2 mic/line input, 4 stereo line inputs, left-to-right 4-level priority system, emergency in, paging mic with chime, 24V override output.

Key Features

  • Single channel; 120 watts of continuous power
  • Supports 4Ω and 70V/100V outputs
  • Class D amplifier topology
  • Intuitive front and rear panels
  • Four priority levels for audio routing
  • 24V priority output overrides local volume controls
  • Dedicated emergency input with mute all switch
  • Paging mic input with contact closure and chime
  • Two mic/line level inputs with 48V phantom power
  • Four stereo inputs
  • Fanless operation
  • Internal universal power supply
  • Auto standby mode
  • Rack mountable (2RU)
  • CE marked, UL listed, and RoHS compliant
  • 5-year warranty

Description

The MA120 mixing amplifier offers a cutting-edge design and superior ease-of-use. The intuitive front panel is clear and intuitive. The volume control rotary on the front panel is prominent, illuminated, and put in the forefront while the mic volume control is smaller and recessed.

This class-d mixing power amplifier offers 120W in 70- or 100-volt mode and comes with three mic inputs balanced, along with four stereo line, mono summed inputs.

Specs

GENERAL
Height 3.5 inches (89 mm)
Width 19 inches (483 mm)
Depth 11.8 inches (300 mm)
Weight 11.0 lbs (5.0 kg)
ENVIRONMENTAL
Ambient Operating Temperature Range 32 – 95° F (0 – 35° C)
Humidity 0-95% relative humidity (non-condensing)
Altitude 0-6,600 ft (0-2000m) MSL
CONTROLS & INDICATORS
Control Chime: Yes
Tone Control: Yes
Wall Panel Controls: Yes
VOX Mute: Yes
Music Level Control: Yes
Front Panel Indicator(s) Front Panel Indicators: Signal present, clipping, emergency mode active, paging active, VOX active
AUDIO
Microphone Paging Mic
Nominal Input Sensitivity (Bal. Mic): -45 dBV (5.6 mVrms)
THD+N (Pre-Out, @ -6dB): < 0.4%
Frequency Response (-3dB):
Balanced Mic: 165 Hz – 20 kHz
Unbalanced, Balanced Line: 20 Hz – 20 kHz
Gain: -15 to +15 dB
Chime Length: 2 sec
Input Impedance: 2 kΩ
Mic A, B
Nominal Input Sensitivity:
Balanced Mic: -45 dBV (5.6 mVrms)
Balanced Line: -12 dBV (250 mVrms)
Unbalanced Line: -12 dBV (250 mVrms)
THD+N (Pre-Out, @ -6dB): < 0.2%
Frequency Response (-3dB):
Balanced Mic: 165 Hz – 20 kHz
Unbalanced, Balanced Line: 20 Hz – 20 kHz
Phantom Power (balanced only): +48VDC (7mA/input)
VOX Attenuation (Mic A, B, Inputs 1-4): 30 dB
Input Impedance: 2 kΩ
Inputs 1-4
Nominal Input Sensitivity (Unbal. Line): -12 dBV (250 mVrms)
THD+N (Pre-Out, @ -6dB): < 0.1%
Frequency Response (-3dB): 20 Hz – 20 kHz
Input Impedance: 10 kΩ
Input Type INPUTS
Number of Inputs
Emergency (line level with contact): 1
Paging Mic (mic level with contact): 1
Mic/Line (balanced): 2
Stereo Line (unbalanced): 4
Input Priority Levels: 4
Priority Input Contact: Yes
Emergency Input
Nominal Input Sensitivity: 0 dBV (1 Vrms)
Emergency Input
Nominal Input Sensitivity: 0 dBV (1 Vrms)
THD+N (Pre-Out, @ -6dB): < 0.5%
Frequency Response (-3dB): 45 Hz – 20 kHz
Input Impedance: 5 kΩ
Impedance 5 kΩ
Maximum Output OUTPUTS
Number of Output Channels: 1
Output Connectors: 4-pin, 0.3 inch (7.6 mm) Euroblock
70V/100V Mode: Yes
Low Impedance Mode: Yes
Priority Output Contact: Yes
Minimum Operational Load: 4Ω
Amplifier
Topology: Class D
RMS Output Power (1% THD): 120 W
Dynamic Power: 150 W
SNR (1% THD): > 90 dB
THD+N (@ -6dB): < 0.5%
Protection: Temperature, overcurrent,
overvoltage, undervoltage
Priority Output
Voltage: 24V
Max Current: 0.5A
Pre-Out
Nominal Output Level: 0 dBV
Standby
Wakeup Sensitivity:
Inputs 1-4: -43 dBV (6 mVrms ± 10%)
Mic A, B (RCA): -50 dBV (5 mVrms ± 10%)
Mic A, B (Balanced, VOX off): -74 dBV (0.3 mVrms ± 10%)
Time to Auto Standby: 10 min
COMPLIANCE
Certifications FCC Part 15B (USA)
UL listed (USA and Canada)
CE Marked (Europe)
RoHS Directive (Europe)