$145.00
The MS-70CDR+ gives musicians 149 spatial effects ranging from lush choruses to crystal-clear delays to atmospheric reverbs. This single stompbox can shape your tone and provide endless depth and textures.
| Maximum number of simultaneous effects | 6 effects | |
| User patch memories | 100 | |
| Sampling frequency | 44.1 kHz | |
| A/D conversion | 24-bit 128× oversampling | |
| D/A conversion | 24-bit 128× oversampling | |
| Signal processing | 32-bit | |
| Frequency response | 20 Hz – 20 kHz (+0.5 dB/-0.5 dB) (when 10kΩ load) | |
| Display | 160×128 dot-matrix LCD | |
| Inputs | L/R | Standard mono phone jacks Rated input level: −20 dBu Input impedance (line): 470 kΩ |
| Outputs | L/R | Standard mono phone jacks Maximum output level: +7.2 dBu (when output impedance 10 kΩ or higher) |
| Input S/N | 122 dB | |
| Noise floor (residual noise) | L/R | –100 dBu |
| Power | AC adapter: 9V DC 500mA center negative (ZOOM AD-16) 2 AA batteries (alkaline, lithium or rechargeable NiMH batteries) | |
| Estimated operation times | • These values are “approximate. • Battery operation times were determined using in-house testing methods. They will vary greatly according to use conditions.” | Alkaline batteries: about 7 hours (about 5 hours using using batteries) NiMH batteries (1900 mAh): about 6.5 hours (about 5 hours using stereo input) Lithium batteries: about 14 hours (about 10 hours using stereo input) |
| USB | Port: USB 2.0 Type-C / Supported cable type: Type-C Handy Guitar Lab: USB 1.1 Full Speed • Use a USB cable that supports data transfer. USB bus power is supported. | |
| Dimensions | 133 mm (D) × 79 mm (W) × 61 mm (H) | |
| Weight | 368 g (excluding batteries) 415 g (including batteries) | |
| Note: 0 dBu = 0.775 V |
